Run out stacker, pneumatic economic design, for dual layer corrugated sheet forming machine

Brief Introduction of Auto Stacking Machine, Auto Stacker

An auto stacker or stacking machine has been built with two main parts: Supporting part and Transportation part. The Supporting part are composed of many arms which is working under pneumatic power to close up and open down so that the roll formed products or the cut metal sheets can drop down to the transportation part which is made of steel frames with many tubes mounted and the part is working with motor power so that the stacked sheets can be moved out and transported to warehouse with a forklift.

Limit or proximity switches are used to control an auto stacker or auto stacking machine. Simply speaking, when the roll formed products or cut metal sheets are pushed to the stacking machine and touch the upper switch, the arms will open down and the sheets will drop down accordingly; when the arms open down to the lower switch, they will close up. There are usually two lengths for auto stackers, 6/8 meters and 12 meters for stacking roll formed products or cut metal sheet with different lengths.

Quick Detail:

1. Thickness : 0.4-0.8mm for roofing, 0.8-1.2mm for decking
2. Material : GI/PPGL/Alu/Stainless Steel
3. Input width : 914/1000/1200/1220/1250mm
4. Stacker length : 8 meter as normal

Description/Technical Parameter details of complete line:

• Details as below table :

Profile Drawing/Layout/Equipment reference pictures:

NKH Machinery is an experienced manufacturer of a wide range of roll forming machines, such as panel/roofing tile /purlin /ridge cap /pipe/ metal deck lines/cut to length & recoiling lines/ crimping/curving machines/folding machines, etc.

Over 10 years of experience has allowed us to become aware of and to incorporate the best practices from around the World. It has allowed us to develop our company’s awareness of the importance of design, performance and quality standards in all aspect of the development and delivery of modern roll forming lines.

Excellence is our expectation. A consistent commitment to quality is something we maintain throughout every level of our organization and every individual within it. Whether working in parts or assembly, service or sales, each member of the NKH machinery team participates in the development process of each machine we create. We will meet your high standards by taking full advantage of the experience, creativity, and wisdom each member of our team has to offer. Our overall goal is to ensure the best possible outcome for you, assisting you in generating profits that are well-worth your investment with a NKH Machine.

We are ready to meet you anywhere in the world to discuss your roll forming requirements and you are welcomed to call Our Sales Team to take your initial enquiry.