Steel rack slot angle roll forming machine with high precision
servo feed in
Brief Introduction of Strut Channel Roll Forming Machine:
The strut channel roll forming machine is the equipment that
manufactures strut from galvanized steel of 1.5-2.5mm thickness.
In addition, one strut channel roll forming machine can technically
produce 3 profiles by adjusting different spacers between rolling
tools. As a matter of fact, the key parts in the line are punching
unit, roll forming unit and cutting unit. However, the position and
working method for punching and cutting unit may vary. Generally,
there are two solutions for roll forming the channels, based on the
line speed. Economical solution and automatic solution, below is
the improved solutions
Quick Detail:
- Thickness : 1.0-2.0mm
- Material : GI/G350
- Driven way: by driven motor
- Cutting way: by hydraulic power pack
- Cutting tolerance : ±1mm
Machine list:
- Un-coiler with pre-leveling(2 in 1)
- Professional lubrication device
- Auto servo feed in device
- Presser
- Punching tools
- Roll former
- hydraulic cutting device
- no power Rack
- PLC control systems
Description/Technical Parameter details of complete line:
- 2 Tons Hydraulic Un-coiler with pre-leveling device
Hydraulic system to expand coil inner hole, four palms
Motorized driving coil rotation, auto stop/start control, 2.2KW
Load capacity=2Ton
Coil width: 200mm
Coil Inner-diameter: Φ510±30mm
- Professional Lubrication device
Equipped between the roller feeder and the press
Lubrication for punching tools and the roll former
Strip width: Max. 200, thickness: 1.5-2.0mm
Servo motor: YASKAWA, 1.3KW
Capacity: 80 tons
Chinese Brand: YANGLI
| Items | Specification | unit | Parameters |
| 1 | Nominal Capacity | Kn | 800 |
| 2 | Nominal stroke | mm | 5 |
| 3 | Slide stroke | mm | 140 |
| 4 | SPM(Variable Option) | Min-1 | 50-70 |
| 5 | Max. Die height | mm | 320 |
| 6 | Die height adjustment | mm | 80 |
| 7 | Between slide center and frame | mm | 300 |
| 8 | Bloster(FB×LR) | mm | 580×1000 |
| 9 | Bolster thickness | mm | 120 |
| 10 | Bed opening (FB×LR) | mm | 390×520 |
| 11 | Slide area(FB×LR) | mm | 420×560 |
| 12 | Shank hole(Dia.×depth) | mm | 50×80 |
| 13 | Between columns | mm | 640 |
| 14 | Motor Power | Kw | 7.5 |
Wall plate frame design, thickness of wall plate is 18mm
18 stages to form
Rollers manufactured from Cr12, heat treatment
Shafts Diameter=ф75mm
Main motor =11KW
Stop to cut
After cut off, there are 8mm material waste
Siemens brand PLC and touch screen, Schneider brand Inverter, Omron
encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
3 meters Length
No power
Profile Drawing/Layout/Equipment reference pictures:
